Type: Classroom Training Course
ISPE CEUs: 1.3
|8 - 9 Aug 2016||Tampa, FL||USA||
Mr. Jack C. Chu, PE|
|8 - 9 Dec 2016||Tampa, FL||USA||
Mr. Jack C. Chu, PE
Oral Solid dosage forms (Tablets and Capsules) are some of the most popular and convenient methods of drug delivery. They can be produced in a non-sterile environment and the process, equipment and technology is well defined and known, after more than 100 years of development. With the high volume of products produced in these dosage forms, it is important that the unit operations for their production be thoroughly understood, developed and implemented. This course focuses on the fundamentals of each discrete processing step (unit operation) with extensive discussions on the current technologies required for the manufacturing and packaging of tablets and capsules.
The course uses a Process and Production Simulation for Unit Ops, including Mixing, Blending, Drying, Sizing, Tableting, Encapsulation and Coating to provide participants with a demonstration of current manufacturing and engineering practices. Troubleshooting through video simulation will vividly provide real-time experiences for identifying the problem, analyzing the problem and solving the problem.
Technological advantages and opportunities, implementation strategy, innovative process and business development practices will also be discussed along with a review of common problems in compliance, supply, and strategy and business management. The course will begin with a description of the three main OSD processing methods: Direct Compression, Wet Granulation and Dry Granulation. It will continue with a detailed review of all the major unit operations associated with OSD manufacturing processes. This includes Ingredient Dispensing/Formulation; Blending; Granulation; Drying; Compression/Encapsulation; Coating; Packaging and Receiving/warehousing Operations.
The course will emphasize on the process, equipment and technology associated with the unit operation, giving the attendee a general understanding of the OSD process and the case study of production related issues and concerns. The specific types of equipment and technology used in today’s modern manufacturing processes will be discussed and attendees will gain an appreciation for the selection and evaluation of such criteria. For example, a discussion of granulation will include information on different types of granulators (low shear, high shear, top drive, bottom drive, integrated processing trains) and typical challenges encountered during operation and scale-up.
PAT, MES and modular PLC process control and monitoring techniques will also be discussed. The course will review many known techniques for process monitoring with particular emphasis on their utilization in scale-up and technology transfer, final dosage unit and analyze the necessary steps in the packaging operation to get from the finished tablet or capsule to the final filled and sealed container. Introduction to packaging equipment for tablet/capsule counting, capping, security seals and bands, labeling, cartoning, and blister packaging will also occur. The course will conclude with a discussion on technology transfer, how to get the product from the R&D laboratory to full-scale manufacturing, and how to transfer a marketed product from one facility to another. A competency test will be administered upon course completion.
Immediately apply the course learning objectives with the complimentary copy of the ISPE Baseline Guide®: Oral Solid Dosage Forms (Individual Download).
This training course is of particular interest to existing and future members of the ISPE Oral Solid Dosage Community of Practice (COP).
ISPE will provide continuing education units (ISPE CEUs) for all North American and European courses. CEUs are nationally recognized units of achievement designed for those individuals continuing their education in their chosen field or profession. Verification of CEUs is based on attendance as well as satisfactory completion of all evaluation materials. Statements of credit will be available for download in your ISPE account within four weeks of the completion of training. Instruction for download will be sent when the CEUs are available. One hour of education programming equals 0.1 ISPE CEU credits.